“Excellent
ventilation, filtration and flow monitoring products and service delivered
in a timely manner – can only be achieved through the highest quality
and knowledgeable customer service division – delivering proven results
to fit our customers needs –ALWAYS is our #1 priority”. We promise
– when you call PALS for a solution - you will find the answer."
Latest
News and Completed Success Stories
Precision Air Liquid Solutions LLC
·
Join our Team! We are looking for
looking for a few good men/women in outside sales throughout Louisiana.
Please send your resume by email to: sales@precisionair-liquid.com
or by fax to: (985)878-2014
PRECISION AIR &
LIQUID SOLUTIONS
We provide the correct
equipment for the proper
retrofit application.
If turn-key is required
we can do that as well. The PDF linked here shows pictures of a recent project we provided Turn-Key for at
an Natural Gas Transmission Plant on GMW reciprocation engines.
We replaced (7) Inlet Filtration housing with Camfil Modular Housing
(CMH) and the Inlet Silencing and all Stainless piping between. (CLICK HERE FOR PDF)
UMC-Skanska – NOLA
Providing specialized BIBO HEPA Filtration Systems throughout Inpatient as well as Ambulatory Care Facility
VAMC – MCC
Providing specialized BIBO HEPA Filtration Systems throughout 4 buildings.
OEM “specialized compactor” firm in South Louisiana – HEPA BIBO filtration packages with fans
Mechanical Construction Company/Hilton
Heat recovery wheel as well as fans and vibration control equipment for various AHU at Hilton Riverfront.
PLUG FAN REPLACEMENTS, Custom AHU as well as silencing & vibration control
ExxonMobil Refining – Baton Rouge, LA
Project included upgrading/replacing existing inlet filter system on main blower/compressor at facility with larger, stainless steel unit, including larger housing, improved weather protection, transitions, ductwork with turning vane and silencer. Shipped 9/2013
Enterprise Products – TOCA Facility
GE Frame 5 retrofits inlet system including housing, weather protection, ducting, and transition, silencing.
Summer 2013
BP Oil – National Oil Well
Provided (4) louver/coalescer inlet air systems on generator packages to protect windings/electrical on packages offshore. Early 2013.
Columbia Gulf Transmission – throughout LA/MS and various locations in KY, WV.
Providing two turbine intake air systems in West VA – Summer/Fall 2013
Chemical – Plaquemine, LA
Wastewater treatment process utilizing 37” McCrometer/Marsh Multi-Mag in a discharge line from a multiple point pump and single header system.
And another:
This is a job we provided a chemical facility in the Baton Rouge area on an open channel flow. The customers needed redundancy in this application as in two flow meters with two sets of electronic to support the meters also they wanted ease of change-out if required, from one to the other if there was a failure of any of the two meters. Each meter had its’ own power source and a selector switch for communication to control room.
The onsite I&E Tech could resolve the meter outage in seconds by a flipping a switch.
Chalmette Refining
Annual calibration and certification of flows for all outfalls back to MS River, since 2004. Scheduled for annual calibration service 5/14 – last calibration was 5/13.
Mansfield Louisiana Paper Mill - Outfalls
Lowering insertable Mag meter into stack pipe to read flow in pipe 15 Feet below ground
(Here is a unique flow application) – CHEMICAL PLANT – Baton Rouge, LA
Customer required a method to read flow at their discharge pipe from the plant. Precision made a custom mounting bracket to install the Hach Flo-Dar open
Channel flow meter to answer their needs.
Photo above shows meter in place studying the outfall.
NASA Michoud Assembly Facility in New Orleans LA
Customer required a way to confirm the plants waste water discharge through their existing flow meter
Was reading correctly. We installed a tap after the flow meter and applied Precision’s portable 1” insertable Mag meter to confirm their existing flow meter was reading correctly.
Here is another application where Precision is confirming waste water discharge at a medical waste facility in the River Road area, just outside of New Orleans.
The U.S. Chemical Safety Board (CSB) released a new safety video depicting three accidents involving combustible iron dust at the Hoeganaes Corporation in Gallatin, Tennessee. The video, entitled “Iron in the Fire,” features three computer animations showing how fine metal particles were lofted and ignited in two incidents, and how a hydrogen explosion and subsequent flash fires caused by lofted metal dust killed a total of five workers and injured three others.
The 14-minute video shows that after the first flash fire on January 31, 2011, which killed two workers, the CSB launched an investigation, discovering large quantities of the combustible metal dust on elevated surfaces, equipment, and floors in many working areas of the plant. Then on March 29, another flash fire occurred, seriously injuring a worker. Investigators then collected iron dust samples and had them tested.
WBENC South networking event and luncheon - April 14, 2011
This happened 4/14/11 at the Hilton in New Orleans - it was for the WBENC South networking event and luncheon. Michael pictured along with the folks with Chevron
Successful "Municipal" Aerator/Blower Retrofit - completed in 2008.
Precision Air Liquid Solutions LLC completed blower retrofit and silencing, along with flow monitoring solutions to JPEBWWTP influent and effluent flows!
JPEBWWTP prior to blower upgrade
Aerator/Blower Retrofit - completed in 2008.
**South
LA Based gas compression station required new
inlet filter box/transition piece for GE Frame
3 Turbine.
1. Solution:
Supplied (4) stage inlet filter box and coalescing
filter system for moisture control and filtration
issues:
**Various
Gas Compression pipeline stations from the Gulf
of Mexico through Canada have reciprocating
engines, gas turbines and compressors with 1950’s
technologies on inlet air and silencing.
1. Solution:
Supply various inlet air solutions – turn-key
– stainless construction. Helps keeps
maintenance issues at bay and after-coolers
clean and dry:
**Grain
elevators/powerhouses have problems with dust
compromising belt driven assemblies at the bearings,
and belts.
Solution:
Direct driven fan assemblies, with low vibration,
less horsepower requirements – custom
engineered and designed for a variety of air
flow and pressure requirements.
ID/FD/GR
powerhouse fans, fan parts – due to abrasive
nature of service replacement parts required
at a competitive and
“fast-track” delivery
– regardless of original fan manufacturer
Latest News and Completed
Success Stories
Precision Air Liquid Solutions LLC
“PALS offers over 20 years of experience in the ventilation, filtration
and flow monitoring market – offering complete sales and service,
along with design assistance for your industrial or governmental plant needs.
Your firm will not only achieve excellent end results with only the highest
quality product and service offerings (with low EMR ratings and proven results)
– but you will also afford your organization the governmental compliance
through utilization of a FARR designated and CCR approved firm as required
in today’s competitive marketplace”. Also, when time becomes
an issue – we WILL deliver your requirements QUICKLY
and with GUARANTEED results."